• <menu id="2uk4e"><nav id="2uk4e"></nav></menu>
  • <menu id="2uk4e"><strong id="2uk4e"></strong></menu>
    <menu id="2uk4e"><strong id="2uk4e"></strong></menu>
  • 全國服務熱線
    15552522412?
    聯系我們
    濟南圣果清潔服務有限公司

    聯系人:田經理

    聯系電話:15552522412?

    網址:http://www.guanyinhuofo.com

    地址:濟南市天橋區北園大街248號二樓西側間

    當前位置: 首頁 > 新聞中心 > 常見問題 >

    高壓清洗車清洗管道的步驟

    來源:http://www.guanyinhuofo.com  發布時間:2021-12-31 16:31:03

    一個步驟就是把脈沖激勵器放置在關閉狀態,并用手把軟管伸進被清洗管道里。
    One step is to place the pulse actuator in the closed state and extend the hose into the cleaned pipe by hand.
    二個步驟就是,當噴嘴碰到被清洗管道彎頭,軟管前進的速度通常會減慢或停止。這個時候,反轉噴頭將會使軟管前進,還有就是,可以手動轉動軟管,使它能順利拐過彎頭進行正常清洗工作。第三個步驟就是,或因種種原因如果軟管停止前進,向后拉回軟管并旋轉1/4圈或半圈,那么軟管將會自己調節通過彎頭,繼續前進。這些都需要不斷摸索總結經驗,掌握清洗管道彎頭的技巧和方法。第二個方面,使用脈沖模式通過彎管:在某些情況下,簡單通過旋轉軟管還不足以通過彎管。所以,這就有必要用產生脈沖水流的方法來解決。在脈沖模式下,泵會產生較大的跳動使軟管產生震動,這有助于軟管前進。
    The second step is that when the nozzle touches the elbow of the cleaned pipe, the forward speed of the hose will usually slow down or stop. At this time, reversing the nozzle will move the hose forward. In addition, you can manually rotate the hose so that it can smoothly turn over the elbow for normal cleaning. The third step is, or for various reasons, if the hose stops moving forward, pull back the hose and rotate it for 1 / 4 turn or half turn, the hose will adjust itself and continue to move forward through the elbow. These need to constantly explore and sum up experience, and master the skills and methods of cleaning pipe elbows. The second aspect is to use pulse mode to pass through the elbow: in some cases, simply rotating the hose is not enough to pass through the elbow. Therefore, it is necessary to solve this problem by generating pulse water flow. In the pulse mode, the pump will produce large runout to vibrate the hose, which helps the hose move forward.
    (1)逆時針旋轉脈沖激勵器手柄以產生脈沖;
    濟南管道疏通
    (1) Rotate the pulse actuator handle counterclockwise to generate a pulse;
    (2)在脈沖作業模式下,仍然需旋轉軟管以便和彎管保持方向一致。一般情況下這個技巧可以通過較難以疏通的彎頭和“u”型或“s”型的彎曲管道。
    (2) In pulse operation mode, the hose still needs to be rotated to keep the same direction with the elbow. In general, this technique can be used through elbows that are difficult to dredge and "U" or "s" curved pipes.
    (3)一旦通過彎頭和“u”或“s”型彎頭,就把脈沖激勵器置于關閉。用原來普通的方法繼續推動噴頭向前進行清洗。高壓清洗車清洗和清潔管道,是通過高壓水從噴嘴的孔里噴到管道內壁上來清潔管道。同樣,高壓產生的推力也可以促使噴嘴在管道內前進。慢慢收回軟管會得到較好的清洗效果。確保脈沖激勵器關閉。這可以在噴嘴產生的壓力和流量。慢慢收回噴嘴軟管,順利清潔管道內壁。要注意的一點是:不論什么時候清洗機的壓力在7-80/150/205上下震蕩時,應當立即停止使用清洗機。
    (3) Once through the elbow and the "U" or "s" elbow, place the pulse actuator in the off position. Continue to push the nozzle forward with the original ordinary method for cleaning. The high-pressure cleaning vehicle cleans and cleans the pipeline by spraying high-pressure water from the hole of the nozzle onto the inner wall of the pipeline. Similarly, the thrust generated by high pressure can also push the nozzle forward in the pipe. Slowly retracting the hose will get better cleaning effect. Make sure the pulse exciter is off. This produces maximum pressure and flow at the nozzle. Slowly retract the nozzle hose and smoothly clean the inner wall of the pipe. It should be noted that whenever the pressure of the washer fluctuates up and down at 7-80 / 150 / 205, the washer should be stopped immediately.
    OB欧宝娱乐